Summer Starts Here - Save up to 70%
Tow Ready Vehicle Wiring Harness Installation - 2018 Nissan Frontier- Video
Hey everybody, Ryan here at etrailer. Today, on our 2018 Nissan Frontier we're gonna be showing you how to install the tow ready replacement four-way flat wiring harness. Before we get into that though, why don't we just check this out and make sure it's gonna work. So what this is gonna be is just a replacement harness, to replace your existing one whether it's a factory one or an aftermarket one. And the reason being, a lot of times these can just get damaged, you know corrosion and if it's out in elements all the time or maybe you left it plugged into your trailer on accident and, you know, when you go to disconnect and drive away and it rips it out or you know, there's a lot of different things that can happen, that can just cause this to get worn out. You know, maybe try to push it in wrong and this broke, whatever the case may be. more
11/16/2022 3:48:58 PM
Roadmaster Flexo-Coil Kit Installation - 2008 Nissan Frontier- Video
Today on our 2008 Nissan Frontier, we're going to take a look at and also show you how to install the Roadmaster Seven to Six Wire Flexo Coil Kit. This is part number RM-146-7. You can see in the relaxed position, we've got a nice, short cable here. This can actually extend up to eight feet. We're going to have plenty of reach even with the longer arm base plates to the all terrain models. Some of them have a little bit longer arm. We're going to be able to connect it without any problem. We want to take our seven pole round in and we want to connect that into the back of our RV wherever your seven pole might be. more
12/27/2016 2:50:06 PM
Trailer Wiring Harness Installation - 2016 Nissan Frontier C55441- Video
Today on 2016 Nissan Frontier, we're going to show you how to install the Curt T-Connector vehicle wiring harness for factory tow packages offering the 4-pole flat trailer connector. Part number is C55441. Now to determine whether we have a factory tow package or we don't have a factory tow package, it's really easy way to figure that out. What we want to do is turn on our headlights, then we'll head under the rear of the vehicle. We're going to come to the underside of the vehicle on the driver's side frame rail here. We're going to see a black plug and a gray plug. more
4/8/2016 10:43:58 AM
Trailer Wiring Harness Installation - 2011 Nissan Frontier- Video
Today on our 2011 Nissan Frontier we're going to be installing the Tow Ready Replacement OEM Tow Package Wiring Harness. This is a seven-way plug, part number is 118267. This is a really simple, easy to do installation. As you can see mounted underneath the rear of the vehicle we're going to have a black plug and a gray plug. Typically they're going to have a little cap in them. For some reason those we're already removed. You just have to pull out the cap by pressing in on the tab located on each one and then just sliding it out. Once we have those out we'll just take our color-coded connectors and slide them right in being sure that we squeeze them all the way together and we hear a click. more
3/19/2015 12:53:12 PM
Trailer Wiring Harness Installation - 2011 Nissan Frontier 118525- Video
Today on our 2011 Nissan Frontier we'll be installing the Tow Ready Custom Fit Vehicle Wiring Harness with 4-pole flat connector, part number 118525. To begin our install we'll first need to go to the passenger side kick panel and remove the interior panel. To do this we'll need to remove the threshold first. To remove the threshold, we'll use a flat-blade screwdriver or interior trim panel tool to get underneath the threshold and pop the fasteners free. Next, we'll need to remove the kick panel. To remove the kick panel, we'll first remove the black cap nut. Then we'll release the fasteners underneath and set the kick panel aside. more
1/10/2014 11:58:48 AM
Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Nissan Frontier- Video
8/30/2013 12:59:50 PM
Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Nissan Frontier BA-1- Video
Today, on our 2013 Nissa Frontier, we'll be test-fitting the Ball Mount Adapter for a Convert-A-Ball Cushion Weight Distribution Shank, part number BA-1. We'll be using Convert-A-Ball's Weight Distribution Shank, part number AM-AC-1 for our test-fit. We'll take the ball mount adapter up to the weight distribution shank and using two pins and clip, we'll secure the ball mount adapter to the weight distribution shank. The ball mount adapter can be positioned anywhere along the weight distribution shank to accommodate different trailer's ride heights. It can also be flipped over in the rise position to allow you to accommodate different trailer ride heights. That'll complete today's test-fit for the Convert-A-Ball Ball Mount Adapter for a Convert-A-Ball Weight Distribution Shank, part number BA-1 on our 2013 Nissan Frontier. . more
8/30/2013 10:11:29 AM
Filter Videos
Filter Videos
